800-257-3526 | contact us Product Selector

Two Color Soft Touch Push-On Knobs

Selco has been leading the audio, music and lighting industry since 1975 with our popular line of two shot knobs. A two shot molding process is used so that the cap/pointer is an integral part of the knob, thus avoiding additional assembly costs. Soft touch knobs are polypropylene and thermoplastic elastomer to provide a smooth velvet feel. Check out our color chart for a large variety of pointer colors to choose from. If you can't find what you need, please contact us!

Thumbnail

Name

Item #

Description

K 3 03 dr110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 dp110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 dr110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 02 tpn110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 tpn110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 drn130

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 tpn130

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 03 drn130

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 05 tpp100

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 6 05 drp100

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 05 drnp120

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 05 tpnp120

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 04 drp110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

K 3 04 drp110

A two shot injection molding process is used so that the cap/pointer is an integral part of knob, thus avoiding subsequent assembly cost. The soft touch knobs are molded in polypropylene and thermoplastic elastomer to provide a smooth velvet rubber feel. The standard body color is black, other color are available to order. Pointers are available in a wide range of color refer to color chart in documents section.

Find a Product

Can’t Find the Product You’re Looking For?

Talk to a Sales Expert Today. 800-257-3526