Benefits:

• Highly accurate and stable

• 10 amp solid state output

• 1 minute/second selection resolution
  

It is the customer's sole responsibility to specify and determine the suitability of a particular control or component based on their unique individual applications and requirements.

Selco/ECC’s Model 2830 Digital Timer is a One-Shot or Delay On Make timer with a built-in SSR solid state output. There are two settings allotting timing ranges from 1 to 63 minutes, and from 1 to 63 seconds. Contact Selco/ECC for further application requirements.

Input Power

115VAC; 50/60Hz

Input/Output Power Connections

.250” quick connect line (Qty. 3)
Labeled “Load”, “Neutral” and “Line”

Outputs

Load, 10 Amps at 115VAC

Timing Range

Timing Resolution

1 second; or 1 minute

Timing Repeatability

Mechanical Information

Overall dimensions are 2.6” W x 2.6” L x 1” D
Metal bottom plate mounts to heat dissipation surface

Maximum Operating
Environmental Temperature

+30 to 158°F; 0 to 90% RH, non-condensing

Timer Functions

One Shot: The output is activated (on) for the selected time period beginning when power is applied. At the end of the time period, the output is switched off.

Delay On Make: The output is (off) for the selected time period beginning when power is applied. At the end of the time period, the output is switched on and stays on.

Part Number

2830-1

View PDF Catalog Page