CDT-2000 — Programmable Countdown Timer

Features:

• 4-digit displayUL approved file #: E230832
• 90+ db beeper
• Two memory settings
• Standard DIN cutout (72mm)
• UL recognized and CSA certified
• 120 VAC operation; 50/60Hz
• Remote input with interlock capability
• Minutes & seconds or hours & minutes

Selco/ECC’s CDT Series (part number: 8322-2398-2000) has been designed to be panel mounted through a 72mm-square DIN cutout. All connections are via the back of the unit by way of 1/4” male quick connect terminals. The increment/decrement interval, beeper loudness, beeper enable/disable, and three modes of remote operation are all easily programmable by the user. Large numerals and finger size membrane switches make this timer especially simple to use. The rear panel is labeled with an easy to read diagram of the power in, relay out, and remote input terminal connections. A separate, U-shaped, mounting bracket (not shown) is attached to the back of unit and holds the timer firmly in place. The bracket accommodates any panel thickness between 1/16” and 1/4”.

Specifications

Unit Type	Programmable countdown timer with alarm
Temperature Range	0°F to 150°F
Operating Voltage	120VAC at 50/60Hz
Mounting	DIN, 72mm-square
Terminations	1/4" quick connect terminals
Readout	4-digit, .56 high
Timing Range	99 hours in hours and minutes OR 99 hours in minutes and seconds
Size	3.17" x 3.17" x 4.75" overall (80.5mm x 80.5mm x 120.7 mm)
Weight	Approximately 10 oz.
Warranty	One year
Approvals	UL (UL File #: E174510) CSA
View PDF Catalog Page

Dimensions

Selco Products Co.
605 South East Street
Anaheim, CA 92805
714•917•1333 Tel
714•917•1355 Fax
Toll-Free Phone:
800-257-3526