Benefits:

• Easy-to-use and program

• Dual range programmable timer

• Optional indicating panel mount LED

• A variety of power inputs and outputs

• Maintains memory (time is saved during power loss)
  
  
  

It is the customer's sole responsibility to specify and determine the suitability of a particular control or component based on their unique individual applications and requirements.

Model 2831 is a dual range timer and is also designed to be a plug-in replacement for Model 2577 Teachme Timer. Both timing ranges are programmed by example. For instance, if you are filling a glass with liquid, just fill the glass once while in program mode, and the time will be remembered (even if power is removed) until it is reprogrammed. An optional panel mount LED indicates that dispensing is in progress. The start button can either be connected to the AC line for 110/220 VAC activation or if low voltage is desired, the button can be connected straight to the board.

Input Power

Selection either by fixed factory setting or jumper selectable field setting

Input/Output Power Connections

Amp Part #: 770968-1, type 4 pin PCB mount connector
(Amp Mating Plug #: 172167-1, Pins #: 77098-1)

Input Signals

Input Signal Connections

Outputs

Connects up to 10A load to input power

Control Logic

Timing Range

Timing Resolution

0.050 seconds

Timing Repeatability

Mechanical Information

Size: 2.35” W x 3.6” L x 1.5” D. Four standoffs are included to mount in 0.156” mounting holes. Mounting footprint is for 1.75” x 3.0” mounting dimensions.

Maximum Operating
Environmental Temperature

+30°F to 158°F; 0 to 90%RH, non-condensing

Options

Conformal coating

View PDF Catalog Page