T Series Encapsulated Thermostats –All-Plastic, Clip-On Mount

Features:

T60 Model—Plastic Body

Request a Quote

 

It is the customer's sole responsibility to specify and determine the suitability of a particular control or component based on their unique individual applications and requirements.

 

  • Dust- and moisture-proof

  • Wide range of operating temperatures

  • 16 Amp load rating

  • Custom temperature ranges available
Applications:

  • Freezers

  • Refrigerators

  • Air Conditioner

The T Series Automatic Reset Thermostat was designed for humid environments. A resin-filled thermoplastic cap covers the thermostat. The fixed factory-calibrated bimetal disc is loacated adjacent to the surface to be monitored. The T60 model features a molded-in snap-on clip that fits 5/16"- or 1/8P-size tubing. This will provide a rapid response to temperature changes. Each device is built to open or close on rise at any desired set point.

Lead wires are normally 6" in length. Custom lead wires are available. Numerous types of terminals can be furnished at an extra cost.

For use in millivolt applications, the T series carries a 12 Vdc, 250mA rating.

 

SPECIFICATIONS

OPERATING TEMP. RANGE

 -4°F to 212°F (-20°C to 100°C)

DIFFERENTIAL
(Minimum)

20°F (11°C), SPST
Temp range: -4°F to 32°F (20°C to 0°C)

14F (8°C), SPST
Temp range: 32°F to 212°F (0°C to 100°C)

27°F (15°C) minimum, SPDT

ENVIRONMENTAL TEMP.

 -4°F to 212°F (-20°C to 100°C)

ELECTRICAL RATINGS

 120/250VAC, 16 Amps, SPST

APPROVALS

UL File No. E145478.XAPX2
CUL File No. E145478.XAPX8
VDE

VIEW PDF CATALOG PAGE

Dimensions

 

Selco Products Co.
605 South East Street
Anaheim, CA 92805
714•917•1333 Tel
714•917•1355 Fax
Toll-Free Phone:
800-257-3526

HOME | THERMAL PRODUCTS | CONTROL KNOBS | PANEL INSTRUMENTS
TECHNICAL SUPPORT | SALES SUPPORT | NEWS | CONTACT SELCO | PRIVACY


©Copyright Selco Products Company, 2000-2001,
All rights reserved.